ISOTRAP S
- A low-cost and optimal solution.
- Horizontal and vertical panel placement
- Pre-assembled EPDM sealant.
- 0.8 kg/m² lightweight design
What is ISOTRAP S?
ISOTRAP S is a versatile family of mounting systems designed for mounting solar panels horizontally and vertically on trapezoidal and sandwich-clad industrial roofs.
Available in four different profile heights – S20, S50, S60-NX, and S85 – the system adapts to various roof configurations and load requirements. Each variant is available in standard lengths of 290, 385, and 540 mm, as well as a longer length of 4,300 mm.
Alüminyum 6063-T66 alaşımından üretilen profiller ve EasyClamp universel kelepçeler, contalı sivri uçlu vidalar ve EPDM sızdırmazlık bantları sayesinde %99.9 sızdırmazlık garantisi sunar. Metrekare başına sadece 0.8 kg ağırlığı ile çatıya minimum yük bindirirken, EasyClamp sistemi ile hızlı ve güvenilir montaj imkanı sağlar.
Product Family
Choose the profile height that best suits your project.
Technical Data
| Area of Use | Trapezoidal and sandwich-type pitched roofs |
| Variants | S20 / S50 / S60-NX / S85 |
| Profile Height | 20 / 50 / 60 / 85 mm |
| Profile Width | 86 mm |
| Size Options | 290 / 385 / 540 mm (+ 4,300 mm long length) |
| Panel Size (L) | 640 - 1,960 mm |
| Panel Size (W) | 990 - 1,010 mm |
| Panel Size (H) | 30 - 45 mm |
| Fixing | Sealed pointed screw / Waterproof rivet |
| Profile / Clamp | Aluminum 6063-T66 |
| Support | Aluminum 6063-T66 + EPDM |
| Fasteners | Stainless Steel A2-70 |
| Weight | ≈ 0.8 kg/m² |
| Residential | Horizontal and Vertical |
System Components
Panel carrier main profile (AL 6063-T66). S20/S50/S60-NX/S85 height options.
Universal end clamp for the exposed edges of panels. Compatible with 30-45 mm frame PV modules.
Universal center clamp for edges between two panels. Compatible with all ISOTEC systems.
It is glued to the underside of the profile to prevent leakage on the roof surface. (Integrated with the profile in S20)
The gasketed screw prevents leakage, secures the profile, and provides maximum durability.
EPDM koruyucu ile %99.9 sızdırmazlık garantili özel perçin. Profili sabitleyerek maksimum dayanım sağlar.
Easy Assembly
-
1Marking The spacing between the profiles for panel installation is determined and marked on the roof surface to ensure suitability for the panel layout.
-
2Profile Placement ISOTRAP S profiles are placed on the ribs either by gluing the EPDM part (S50/S60-NX/S85) or directly (S20) according to the marking.
-
3Fixing Sealed pointed screws or waterproof rivets are mounted vertically to the roof at the points where they align with the corrugation. The opening of the seal should be observed.
-
4Clamp Assembly EasyClamp End (outer edges) or EasyClamp Mid (between panels) holders are installed on the assembled profiles, taking their positions into consideration.
-
5Panel Assembly The panels are fitted onto the profiles, and the panel assembly is completed by tightening the Allen bolts on the EasyClamp holders with a torque of 14-17 Nm.
Technical Documents
Download all technical documentation for the product.
