ISOTEC Enerji A.Ş.
Çerkeşli Mah. İmes OSB 19. Cad. No:18
Kocaeli Dilovası Türkiye
Tel: +90 262 244 4309
info@isotec.com.tr
ISOTEC Solar GmbH
Goethestraße 4-8,
60313 Frankfurt am Main
Tel.: +49 69 2474 5529 0
info@isotecsolar.de
ISOBEAM H
©ISOBEAM H solar mounting system used as a full-length rail 3, 4 and 5 rib trapezoidal and sandwich coated It is applied on roofs to be mounted on purlins or beams.
Used in horizontal or vertical placement The ©ISOBEAM H mounting system is manufactured from high-strength 6063 T66 aluminum alloy, and ©BUP roof covering with fasteners across the rib direction and from the rib crest with saddle-type stainless steel stud screws applied with.
©BUP from the inside of the apparatus the option of 5 cm adjustment and that the machine socket can reach every area has been designed in such a way that With the stud + ©BUP + mounting rail, the solar power plant that you will apply can be lifted up to 20 cm from the roof covering. In this way, much better air circulation and production increases of up to %5 in power plant production performance can be created.
Four different heights In addition to being an economical solution with its option, it is long-lasting and covered by a 12-year ISOTEC warranty.
©ISOBEAM mounting system is designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.
Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp & ©EasyClamp V.1.3 edge clamp sets are compatible with all of our systems and also offer up to 25% faster installation during the solar panel mounting process.
It brings an additional load of 1.4 – 2.4 kg to 1 square meter roof area and is among our lightest mounting systems.
|
Usage area: Trapezoidal roofs, sandwich roofs
|
|
|
Compatible solar panel sizes:
L: 1550- 2450mm / W: 950 – 1200mm / H: 35 – 45mm |
|
|
Fixing to roof purlins: Concrete, Steel or Wood stud
|
|
|
Raw materials used:
|
|
|
Technical Specifications:
This application can be used when the rib spacing is a maximum of 25 cm and in horizontal layout. |
|
|
Length options: 1050 – 6050mm
|
|
|
Height options: 30 – 45 – 60 – 85mm
|
 |
 |
 |
|
|
|
In brief
ISOBEAM H is a full-length rail PV mounting system for roofs clad with 3-, 4- and 5-rib trapezoidal sheet or sandwich panels, fixed to the roof purlins or beams. Its 6063-T66 aluminium rails are carried on BUP brackets and stainless studs and can raise the modules up to 20 cm above the roof cladding.
Frequently asked questions
Which roofs is ISOBEAM H used on?
It is used on roofs clad with 3-, 4- and 5-rib trapezoidal sheet or sandwich panels. The rails are not fixed to the cladding itself but to the concrete, steel or timber purlins and beams beneath it, using studs.
How high can ISOBEAM H lift the modules, and why does it matter?
With the stud, BUP bracket and rail together, the array can be raised up to 20 cm above the roof cladding. This gives better airflow under the modules and can raise plant output by up to 5%.
How much load does ISOBEAM H add to the roof?
It adds 1.4-2.4 kg per m² of roof area and is among the lightest ISOTEC mounting systems. Rails are aluminium 6063-T66, clamps aluminium 6005-T6, seals EPDM, and fasteners stainless steel A2-70 and bimetal.
Which rail lengths and heights are available?
Rail lengths range from 1,050 to 6,050 mm. Height options are 30, 45, 60 and 85 mm. The rails suit modules 1,550-2,450 mm long with a frame height of 35-45 mm.
What warranty and design basis does ISOBEAM H have?
The system carries a 12-year ISOTEC warranty. It is designed and manufactured on the basis of the snow, wind and earthquake loads set out in the Eurocode standards.
