Flat-roof PV · Romania

Flat-Roof PV in Romania on ISOFLAT D13 V.3 Mounts

Module rows and galvanised tray on the flat roof
In brief

ISOTEC supplied the ISOFLAT D13 V.3 mounting system for a solar plant on a flat roof in Romania. The system is ballasted without penetrating the roof; the photo also shows the galvanised cable tray running between the rows.

The project

Ballasted ISOFLAT D13 on a flat roof

The plant sits on a flat roof in Romania that carries rooflight domes and ventilation units. The module rows run around this roof equipment, and a galvanised cable tray crosses between the rows.

ISOFLAT D13 carries the modules back to back in an east–west layout and is held down by ballast, so the roof is not drilled; its main rail is the TFX-2400 profile.

Section · schematic
13°13°EASTWESTBS3 double rear legballastTFX-2400 rail · no drilling
Generic ISOFLAT D13 section; it does not show this roof's dimensions and is schematic.
Technical details
Main rail
TFX-2400
System tilt
13° E–W
Fixing
Ballast, no roof penetration
Roof equipment
Rooflight domes
Cable route
Galvanised tray
Scope
System supply
FAQ

Which mounting system was used on this roof?

The flat-roof system ISOFLAT D13 (V.3).

Was the roof covering drilled?

ISOFLAT D13 is fixed with ballast and does not penetrate the roof.

What runs between the module rows?

The photo shows a galvanised cable tray running between the module rows.

From the same country

More ISOFLAT D13 projects

Planning a flat-roof project?

Send us the roof height, the roof covering type and the ballast load capacity, and we will prepare a project-specific ISOFLAT quotation.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems