Pitched-roof PV · Türkiye

358 kWp Rooftop PV Plant in Izmir on the ISOTRAP S Mounting System

Profile rows before module mounting
In brief

ISOTEC used the ISOTRAP S mounting system for a 358 kWp pitched-roof PV plant in Izmir, Türkiye. On a large trapezoidal sheet roof, short aluminium profiles were set out in regular rows across the ribs.

The project

Profile rows on a trapezoidal sheet roof

The photo was taken at the Izmir site before the modules went on: short aluminium profiles are laid out in even rows across the surface of a large, pitched trapezoidal sheet roof. A flat plain stretches out beyond it.

The ISOTRAP S pitched-roof system fixes each short aluminium profile across two neighbouring ribs with sealed screws or rivets. The sheet cladding stays as it is, and the modules are clamped to these profiles.

Section · schematic
Modulemid clampend clampISOTRAP S profile (20–85 mm)2 screws per crest + EPDM
Schematic drawing of the general structure of the ISOTRAP S system. No dimensions of this project are given.
Technical details
Capacity
358 kWp
Roof type
Trapezoidal sheet, pitched
Profile
ISOTRAP S · short profile
Fixing
Screws/rivets on the ribs
Profile material
AL 6063-T66
Scope
ISOTRAP S system
FAQ

Which mounting system was used at this Izmir project?

ISOTEC's ISOTRAP S system for pitched trapezoidal sheet roofs.

How are the profiles fixed to the roof?

ISOTRAP S profiles are fixed across the ribs with sealed screws or rivets.

Which stage does the photo show?

The stage before module mounting: short aluminium profiles set out in rows across the roof.

From the same country

More ISOTRAP S projects in Türkiye

Planning a project on a trapezoidal sheet roof?

Send us a photo of the roof, the rib spacing and the module size, and we will prepare an ISOTRAP quotation.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems