Rooftop PV · Türkiye · 2020

1.17 MWp Rooftop PV in Honaz, Denizli: ISOTRAP S Mounting System

Profile rows before the modules
In brief

In 2020 ISOTEC supplied the ISOTRAP S mounting system and prepared the structural analysis for a 1.17 MWp pitched-roof PV plant in Honaz, Denizli. A total of 2,970 modules of 395 Wp sit on short aluminium profiles fixed to a sandwich-panel roof with five crests.

The project

Short profile rows on a six-bay sandwich-panel roof

The plant is installed on the double-pitched sandwich-panel roof of a facility with a plant area of about 22,000 m² in Honaz, Denizli. The roof consists of six bays, with gutters, skylights and a lightning rod between them. The photo shows the stage before the modules arrive: short aluminium profiles cross the roof crests in orderly rows.

The ISOTRAP S pitched-roof system bridges two neighbouring crests with short aluminium profiles, 85 mm high and 385 mm long, fixed with sealed self-drilling screws over an EPDM sealing strip. EasyClamp clamps hold the modules. On this project 6,418 profiles carry 2,970 modules.

The project-specific structural report is based on Eurocode EN 1990 and EN 1991 with TS 498: snow zone 2 (0.75 kN/m² ground snow load), a wind pressure of 0.80 kN/m² for a 10 m building height and a 25-year design life. The profiles are made of AL 6063-T66 aluminium.

Section · schematic
Modulemid clampend clampISOTRAP S profile (20–85 mm)2 screws per crest + EPDM
The drawing shows the general layout of the ISOTRAP S system; it carries no dimensions from this project.
Technical details
Modules
2,970 × 395 Wp
Module size
2008 × 1002 mm
Roof type
Sandwich · 5 crests
Roof pitch
6°
Profile
ISOTRAP S85 · 385 mm
Fixing
Sealed screws + EPDM
Profile material
AL 6063-T66
Ground snow load
0.75 kN/m²
Wind pressure
0.80 kN/m²
Building height
10 m
Altitude
364 m
Scope
Statics, system supply
FAQ

Which mounting system was used on the roof in Honaz?

ISOTEC's ISOTRAP S, which is fixed on the crests of trapezoidal and sandwich roofs. Short aluminium profiles of 385 mm carry the 2,970 modules.

How were the profiles fixed to the roof?

With sealed self-drilling screws of 5.5 × 25 mm into the crests, with an EPDM sealing strip underneath each profile.

Which loads was the roof checked for?

The project-specific structural report is based on a ground snow load of 0.75 kN/m² (snow zone 2) and a wind pressure of 0.80 kN/m².

What are the plant capacity and module count?

The plant has 1,173.15 kWp, made up of 2,970 modules of 395 Wp.

From the same country

More pitched-roof projects in Denizli

Planning a project on a sandwich or trapezoidal roof?

Send us a roof photo, the crest spacing and the module size, and we will prepare an ISOTRAP quotation with a project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems