Standing-seam roof PV · Türkiye

1.44 MWp Standing-Seam Roof PV in Edirne: ISOKEN Mounting System

Rooftop plant from above
In brief

ISOKEN was used as ISOTEC's standing-seam roof solution for a 1.44 MWp rooftop PV plant in Edirne. The seam clamps grip the raised seams of the roof covering, so the roof is not drilled; aluminium rails are fixed to these clamps.

The project

Rail lines on a standing-seam roof without drilling

The photos show different stages of a broad roof in Edirne: the rails first spread across the surface, then the modules settle onto them. Hills are visible in the background and a parapet wall at the roof edge; the rail lines have connection points at regular intervals.

The ISOKEN standing-seam roof system clamps its seam clamp onto the raised seam of the roof covering; the covering is not drilled. Aluminium rails are attached to these clamps and the modules are held on the rails with EasyClamp clamps.

Section · schematic
Modulemid clampend clampseam clamp, no drillingBUP + ISOBEAM rail
The drawing shows the general layout of the ISOKEN system; it carries no dimensions from this project.
Technical details
Capacity
1.44 MWp
Roof type
Standing seam
Rail
Aluminium
Fixing
Clamped on seams
Location
Edirne
Scope
System supply
FAQ

Which mounting system was used on this roof in Edirne?

ISOKEN, ISOTEC's system for standing-seam roofs.

Was the roof covering drilled?

No. ISOKEN seam clamps grip the raised seam of the roof covering, so the covering is not drilled.

What is the capacity of the plant?

The installed capacity is 1.44 MWp.

From the same country

More standing-seam and pitched-roof projects

Planning a project on a standing-seam roof?

Send us the seam type and a roof photo, and we will check the seam clamp for compatibility and prepare an ISOKEN quotation.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems