Pitched-roof PV · Türkiye · 2025

490.88 kWp Rooftop PV in Konya on ISOKEN Standing-Seam Mounts

Seam clamps set out along the seams
In brief

ISOTEC supplied the ISOKEN mounting system for a 490.88 kWp rooftop solar plant on a standing-seam metal roof in Konya, Türkiye. The seam clamps grip the raised seams of the roof cladding, so the roof skin is not penetrated.

The project

Fixing without drilling on a standing-seam roof

The plant's roof is a large, dark standing-seam metal roof facing the red-tiled residential districts of Konya and a minaret. In the photo the seams run in parallel strips along the whole length of the roof, with seam clamps set out between them; no modules have been laid yet.

The ISOKEN standing-seam roof system was used for the installation. ISOKEN fixes its clamps by gripping the raised seam of the roof cladding; the cladding is not drilled. In the photo the clamps are set out at intervals along the seam lines.

Section · schematic
Modulemid clampend clampseam clamp, no drillingBUP + ISOBEAM rail
Schematic drawing of the system's general build-up. No dimensions from this project.
Technical details
System
ISOKEN
Roof type
Standing-seam metal roof
Capacity
490.88 kWp
Location
Konya
Fixing
Clamped to the seam
Roof skin
Not penetrated
FAQ

Which mounting system was used at this plant in Konya?

ISOKEN, ISOTEC's system for standing-seam metal roofs.

Is the roof skin drilled?

No. The seam clamps grip the raised seam of the cladding; no screws are driven through the roof.

How large is the plant?

The installed capacity is 490.88 kWp.

From the same country

More ISOKEN rooftop projects

Looking for a mounting system for your own project?

Send us your roof details and module size, and we will prepare a quotation with project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems