Ground-mount PV · Türkiye · 2022

25.74 MWp Solar Plant in Gaziantep on ISOGROUND TWO Ground Mounts

One of the plant's parcels, aerial view
In brief

In 2022 ISOTEC designed, manufactured and delivered the ISOGROUND TWO mounting system for a 25.74 MWp ground-mount solar plant in Nurdağı, Gaziantep, Türkiye. The plant spans three parcels, with modules in a 4H layout at a 26° tilt and posts set in concrete in core-drilled holes.

The project

25.74 MWp across three parcels

The plant was built in the Nurdağı district of Gaziantep on a large site at 552 m above sea level, spread over three parcels. Each aerial photo shows one of the plant's parcels: the site, surrounded by farmland, is divided into blocks by access roads, with small technical kiosks set between the blocks.

For this site ISOTEC designed the ISOGROUND TWO ground-mount system in a 4H layout: the modules are tilted at 26° and each table carries four rows of modules in landscape orientation (tables of 4×13 and 4×7 modules). The 550 Wp modules measure 2278 × 1134 mm, with their lower edge 600 mm above ground. The three parcels have 6.18, 6.69 and 12.87 MWp.

The posts were fixed in core-drilled holes and set in concrete, to a depth of 1 m. The front post is a C 110x60x15x3 profile and the rear post a C 100x40x15x3 profile (S355); joints use A2-70 stainless steel bolts. The structural report prepared for each parcel is based on a snow load of 0.8 kN/m² (snow zone 3), a wind pressure of 0.49 kN/m² taken from wind tunnel test results, and a seismic acceleration of 0.411 g.

Section · drawn to scale
26°600mm2,650 mm1,000 mm4 modules landscape (4H) · 4 × 1134 mmrafter + purlinsfront postrear postdriven pile, no concreteSOUTHNORTH
Dimensions from this project's project summary sheet. Lower module edge 600 mm above ground, 2,650 mm between posts, 1,000 mm embedment. Bracing omitted for clarity.
Technical details
Module output
550 Wp
Module size
2278 × 1134 mm
Table types
4×13 · 4×7 landscape
Tilt
26°
Ground clearance
600 mm
Foundation
Core-drilled, concrete · 1 m
Posts
S355 · 3 mm
Snow load
0.8 kN/m²
Wind pressure
0.49 kN/m²
Seismic
PGA 0.411 g
Structural report
Project-specific · 3 reports
Altitude
552 m
FAQ

Which mounting system was used at this plant in Gaziantep?

ISOTEC's double-post ground-mount system ISOGROUND TWO. The tables use a 4H layout with four rows of modules in landscape.

How were the posts fixed in the ground?

The posts were set in concrete in core-drilled holes, 1 m deep.

Which loads was the structure designed for?

The structural report for each parcel is based on a snow load of 0.8 kN/m², a wind pressure of 0.49 kN/m² and a seismic acceleration of 0.411 g.

How many parcels does the plant cover?

Three parcels: 6.18 + 6.69 + 12.87 MWp, 25.74 MWp in total.

From the same country

More ISOGROUND projects in Türkiye

Planning a ground-mount project?

Send us the slope, the soil report and the module size, and we will prepare an ISOGROUND quotation with a project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems