Pitched-roof PV · Türkiye

525 kWp Rooftop PV in Konya on ISOTRAP S Mounting System

Before the modules: rows of profiles
In brief

ISOTEC supplied the ISOTRAP S mounting system for a 525 kWp rooftop solar plant on a large sheet-metal roof in Konya, Türkiye. The photos show the roof in two stages: profile rows on the crests, and modules laid on the profiles.

The project

Rows of profiles on a white sheet-metal roof

The plant was built on a large white sheet-metal roof in Konya, surrounded by other roofs, chimneys and ventilation ducts. The first photo shows the stage before the modules: the profiles are set out in regular rows on the crests and run across the roof surface. In the close-up, the modules sit on the profiles above the crests of the sheet cladding.

The ISOTRAP S pitched-roof system was used for the installation: the profiles sit in rows on the crests of the sheet roof, and the modules are laid on top of them.

Section · schematic
Modulemid clampend clampISOTRAP S profile (20–85 mm)2 screws per crest + EPDM
Schematic drawing of the system's general build-up. No dimensions from this project.
Technical details
System
ISOTRAP S
Roof type
Sheet-metal roof
Capacity
525 kWp
Location
Konya
Profiles
Rows on the crests
Stage
Before and after modules
FAQ

Which mounting system was used at this plant in Konya?

ISOTEC's short-profile system for trapezoidal and sandwich-panel roofs, ISOTRAP S.

How are the profiles arranged on the roof?

In the first photo the profiles stand in even rows on the crests of the sheet roof; in the second the modules have been laid on them.

How large is the plant?

The installed capacity is 525 kWp.

From the same country

More ISOTRAP S rooftop projects

Looking for a mounting system for your own project?

Send us your roof details and module size, and we will prepare a quotation with project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems