Flat-roof PV · Türkiye

1.06 MWp Rooftop PV in Kocaeli on ISOFLAT D13 Mounts

Back-to-back rows with rubber pads under the feet
In brief

ISOTEC supplied the ISOFLAT D13 mounting system for a 1,056 kWp (1.06 MWp) solar plant on a membrane-covered flat roof in Kocaeli, Türkiye. The modules sit in an east–west layout, two rows back to back at a 13° tilt, with the feet resting on rubber pads.

The project

Back-to-back rows on a membrane roof

The plant is on a wide roof in Kocaeli, surrounded by large industrial buildings. The light-grey membrane surface has a parapet at its edge, and the modules run in long parallel rows along the roof.

ISOFLAT D13 is an east–west system that carries two module rows back to back in a single symmetrical structure; its tilt is 13°, it is held down by ballast and does not penetrate the roof covering. The photos show black rubber pads under every foot and neighbouring rows standing back to back, tilted in opposite directions.

Section · schematic
13°13°EASTWESTBS3 double rear legballastTFX-2400 rail · no drilling
Generic ISOFLAT D13 section; it does not show this roof's dimensions and is schematic.
Technical details
Capacity
1,056 kWp
Fixing
Ballast · no drilling
System tilt
13° E–W
Roof type
Membrane flat roof
Under the feet
Rubber pads
Layout
Back to back, east–west
FAQ

Which mounting system was used on this roof in Kocaeli?

ISOFLAT D13, the east–west flat-roof system.

Which way do the modules face?

With ISOFLAT D13 two module rows sit back to back, facing east and west.

What is the installed capacity?

The installed capacity is 1,056 kWp, or about 1.06 MWp.

From the same country

More ISOFLAT D13 projects

Planning a flat-roof project?

Send us the roof height, the roof covering type and the ballast load capacity, and we will prepare a project-specific ISOFLAT quotation.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems