The ©ISOBEAM Vo solar mounting system, which is used as a full-length rail, is applied on onduline roofs to be mounted on purlins or beams.
in horizontal layout The ©ISOBEAM Vo mounting system used is manufactured from high-strength aluminum 6063 T66 alloy. ©BUP With the connection apparatus, the onduline roof covering from the pitch direction and pitch top saddle stainless stud screws applied with.
©BUP from the inside of the apparatus Possibility to adjust 5cm and machine bite can enter any area. has been designed in such a way that With the stud + ©BUP + mounting rail, it can be lifted up to 20 cm from the roof covering of the solar power plant you will apply. In this way, you can achieve much better air circulation and production performance up to %5 in power plant production processes.
Four different heights In addition to being an economical solution in hot regions with its option, it is long-lasting and covered by a 12-year ISOTEC warranty.
©ISOBEAM mounting systems are designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.
Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp & ©EasyClamp V.1.3 edge clamp setleri tüm sistemlerimiz ile uyumlu olmakla birlikte güneş panel montaj sürecinde %25’e kadar hızlı kurulum avantajı sağlamaktadır.
It brings an additional load of 1.8 – 2.9 kg to 1 square meter roof area and is among our lightest mounting systems.
Usage area: onduline roofs
Compatible solar panel sizes:
L: 1550- 2450mm / W: 950 – 1200mm / H: 35 – 45mm
Fixing to roof purlins: Concrete, Steel or Wood stud
Raw materials used:
Solar panel placement is generally applied horizontally on Onduline covered roofs. In case the purlins are in different directions, solar panels can be applied vertically.
Length options: 1050 – 6050mm
Height options: 30 – 45 – 60 – 85mm