Our ©ISOTILE PRO solar mounting system, which is used as a full-length rail, is compatible with many local and foreign tiles. For example, it can be applied with tiles produced by brands such as ottoman single slotted, Ottoman double slotted, Mediterranean tile and braas.
©ISOTILE PRO mounting hooks used in vertical placement are manufactured from durable stainless steel or centrifugal galvanized ST52 raw material and ©ISOBEAM rails are used.
fixed to purlins or rafters of the roof structure ©ISOTILE PRO tile hooks are available in two different versions.
©ISOTILE PRO Our standard hook is used in regions with low snowfall and is the economic version.
Our ©ISOTILE Pro hook is preferred in regions with heavy snowfall. ©ISOTILE Pro hook does not put a load on the tile due to its special form in case of overhead loads, so it does not break the tile.
Used with ISOBEAM rails and in four different heights With the option, different openings are passed, creates optimum air circulation in hot regions. Our long-lasting tile roof mounting system is covered by a 12-year ISOTEC warranty.
©ISOTILE PRO mounting systems are designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.
Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp & ©EasyClamp V.1.3 edge clamp The sets are compatible with all our systems and speed up the solar panel assembly process up to .
It brings an additional load of 2.4 – 3.5 kg to 1 square meter roof area and is among our medium light mounting systems.
Usage area: Tile type roofs
Compatible solar panel sizes:
L: 1550- 2450mm / W: 950 – 1200mm / H: 35 – 45mm
Fixing to roof purlins: With Concrete, Steel or Wood screws
Raw materials used:
Vertical placement is recommended. If horizontal placement is desired, double caft rails may be required.
Length options: 1050 – 6050mm
Height options: 30 – 45 – 60 – 85mm