Ground-mount PV · Türkiye · 2020

1.61 MWp Solar Plant in Kahramanmaraş on ISOGROUND TWO Ground Mounts

Module blocks and the surrounding farmland
In brief

In 2020 ISOTEC designed, manufactured and delivered the ISOGROUND TWO mounting system for a 1.61 MWp ground-mount solar plant built on seven separate plots in Dulkadiroğlu, Kahramanmaraş. The modules of 325 Wp sit at a 25° tilt on double-post steel frames, with the posts driven into the ground.

The project

One plant on seven plots across a plain

The plant stands on a wide plain in the Dulkadiroğlu district of Kahramanmaraş, surrounded by farmland with mountains in the distance. It is not a single block but seven separate plots in the same area: in the aerial photos the module blocks follow the plot boundaries and are fenced.

For this site ISOTEC designed the ISOGROUND TWO ground-mount system in its steel-on-steel version, with portrait modules on two- and three-row tables of different lengths, from 2x9 up to 3x11. Each frame consists of a front post, a rear post, a beam and the Z-purlins that carry the modules; the plant uses 1,273 front and 1,273 rear posts in total. The 325 Wp modules measure 1669 × 1002 mm and are tilted at 25°.

The posts were fixed by driving them into the ground, following a pile-driving plan prepared for the project. The posts are 4 mm S235 steel and the beams 2 mm S355, all hot-dip galvanised, with A2-70 stainless fasteners. The structural report for each plot is based on TBDY 2018 and TS EN 1991 and uses a snow load of 0.85 kN/m².

Section · schematic
25°2 modules portrait (2V) · 2 × 2382 mmrafter + purlinsfront postrear postdriven pile, no concreteSOUTHNORTH
Generic ISOGROUND TWO section; table lengths vary on this project, so no single set of dimensions is shown and the drawing is schematic.
Technical details
Module rating
325 Wp
Module size
1669 × 1002 mm
Layout
2V and 3V · 2x9–3x11
Tilt
25°
Site
7 plots · Dulkadiroğlu
Foundation
Driven piles
Posts · beams
S235 4 mm · S355 2 mm
Coating
Hot-dip galvanised
Fasteners
A2-70 stainless
Snow load
0.85 kN/m²
Structural report
One per plot
Scope
Statics, production, supply
FAQ

Which mounting system was used at this plant in Kahramanmaraş?

ISOTEC's double-post ground-mount system ISOGROUND TWO. The tables are two- and three-row types with portrait modules (2x9 up to 3x11).

How were the posts fixed in the ground?

The posts were driven into the ground; the pile-driving plan was prepared for this project.

Which loads was the structure designed for?

The structural report for each plot is based on TBDY 2018 and TS EN 1991, with a snow load of 0.85 kN/m².

What is the plant's installed capacity?

The order records give 1,610.7 kWp, i.e. 1.61 MWp, spread over seven plots.

From the same country

More ISOGROUND projects in Türkiye

Planning a ground-mount project?

Send us the slope, the soil report and the module size, and we will prepare an ISOGROUND quotation with a project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems