Ground-mount PV · Germany · 2024

Trollenhagen Solar Plant on ISOGROUND TWO Ground Mounts

Post rows and an open trench
In brief

ISOTEC designed and manufactured the ISOGROUND TWO mounting system for a ground-mount solar plant on the Trollenhagen airfield site in Germany and delivered it in 2024. The tables carry two portrait rows of 575 Wp modules at a 20° tilt.

The project

ISOGROUND TWO on an airfield site

The plant was built on the grounds of Trollenhagen airfield (Flugplatz Trollenhagen). The order was confirmed in November 2023 and the steel components were shipped in February 2024. The site photo shows rows of posts on grassland with an open trench between them.

For this site ISOTEC designed the ISOGROUND TWO ground-mount system in steel-steel construction: a double-post frame of front and rear posts, a main beam and Z-purlins carries the modules at a 20° tilt. The tables hold two portrait rows of modules; the order covers 2V25 tables, 25 modules wide, and shorter table types. The modules measure 2278 × 1134 mm at 575 Wp.

Table details were prepared both for driven posts and for concrete-mounted posts on base plates, and the delivery included 457 hot-dip galvanized base plates. The posts are 3 mm S355 steel, hot-dip galvanized; the beams are C 90x45x12x2 and the purlins Z 90x55x10x1.5 in S350GD steel with Z600 coating. Two separate structural calculations were prepared, one for the inner and one for the edge zone of the plant.

Section · schematic
25°2 modules portrait (2V) · 2 × 2382 mmrafter + purlinsfront postrear postdriven pile, no concreteSOUTHNORTH
The drawing shows the general structure of ISOGROUND TWO, not this project's dimensions. Bracing omitted for clarity.
Technical details
Modules
575 Wp
Module size
2278 × 1134 mm
Tables
2V · 2 portrait rows
Tilt
20°
Foundation
Driven / on concrete
Base plates
457 pcs
Material
S355 · S350GD Z600
Structural report
Inner + edge zones
Delivery
February 2024
FAQ

Which mounting system was used at the Trollenhagen plant?

ISOTEC's double-post ground-mount system ISOGROUND TWO. The tables carry two rows of portrait modules at a 20° tilt.

How were the posts fixed in the ground?

Table details were prepared both for driven posts and for concrete-mounted posts on base plates; 457 base plates were part of the delivery.

How was the structure calculated?

Two separate project-specific structural calculations were prepared, one for the inner zone and one for the edge zone of the plant.

From the same country

More ISOGROUND projects in Germany

Planning a project on sloped or uneven ground?

Send us the slope, the soil report and the module size, and we will prepare an ISOGROUND quotation with a project-specific structural analysis.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems