Standing-seam roof PV · Sweden

26 kWp Standing-Seam Roof PV in Sweden on ISOKEN Mounts

Rails across the seams, snow guards and flue
In brief

ISOTEC's ISOKEN seam-clamp system was used for a 26 kWp rooftop solar plant in Sweden. The clamps grip the seams of the roof covering, so no holes were drilled in the roof.

The project

Mounting on a standing-seam metal roof without drilling

The plant was built on a dark standing-seam metal roof among detached houses in Sweden. The roof has chimney flues and snow guards, and the rail lines run between them.

The roof uses the ISOKEN seam-clamp system. The clamp grips the raised seam of the roof covering and the ISOBEAM rail is attached to it; the photos show the stage where aluminium rails are fixed across the seams with the clamps. Because the covering is not drilled, the roof stays watertight.

Section · schematic
Modulemid clampend clampseam clamp, no drillingBUP + ISOBEAM rail
Schematic drawing of the general ISOKEN structure. No dimensions are given for this project.
Technical details
Roof type
Standing-seam metal roof
Fixing
Clamped to the seams
Rail
ISOBEAM profile
Fasteners
A2-70
Roof fittings
Chimneys, snow guards
Scope
System supply
FAQ

Which mounting system was used on this roof in Sweden?

ISOKEN, the system developed for standing-seam roofs.

Was the roof covering drilled?

No. The seam clamps grip the seams of the roof covering and the covering is not drilled.

How are the rails attached?

ISOBEAM rail profiles are attached to the seam clamps, and the modules sit on the rails.

From the same country

More ISOKEN and pitched-roof projects

Planning a project on a standing-seam roof?

Send us the seam type and photos of the roof, and we will prepare the right clamp and an ISOKEN quotation for your project.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems