ISOTEC Enerji A.Ş.
Çerkeşli Mah. İmes OSB 19. Cad. No:18
Kocaeli Dilovası Türkiye
Tel: +90 262 244 4309
info@isotec.com.tr
ISOTEC Solar GmbH
Goethestraße 4-8,
60313 Frankfurt am Main
Tel.: +49 69 2474 5529 0
info@isotecsolar.de
ISOPLATE
©ISOPLATE solar mounting system, which is used as a full-length rail, is applied on shingle covered roofs to be mounted on purlins or beams.
in horizontal layout The ©ISOPLATE mounting system used is manufactured from high-strength 6063 T66 aluminum alloy, and ©BUP It is placed under the shingle coating with connection apparatus and ©PPLATE, and it is attached to the purlins with special gasketed studs. is implemented.
Specially developed for shingle roofs Thanks to ©PPLATE, watertight sealing is achieved and a secure installation is performed.
©BUP from the inside of the apparatus the option of 5 cm adjustment and that the machine socket can reach every area has been designed in such a way that With the stud + ©BUP + mounting rail, the solar power plant that you will apply can be lifted 16 cm from the roof covering. In this way, it can provide much better air circulation and more production up to %5 at power plant production values.
Four different heights Optimum in hot regions with the option ISOBEAM option is offered and besides being an economical solution, it is long-lasting and covered by a 12-year ISOTEC warranty.
©ISOPLATE mounting system is designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.
Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp & ©EasyClamp V.1.3 edge clamp sets are compatible with all of our systems and also offer up to 25% faster installation during the solar panel mounting process.
It brings an additional load of 1.4 – 2.4 kg to 1 square meter roof area and is among our lightest mounting systems.
|
Usage area: Shingle covered roofs
|
|
|
Compatible solar panel sizes:
L: 1550- 2450mm / W: 950 – 1200mm / H: 35 – 45mm |
|
|
Fixing to roof purlins: Concrete, Steel or Wood stud
|
|
|
Raw materials used:
|
|
|
Technical Specifications:
The orientation of the purlins and beams determines the layout. Purlin spacing and direction must be specified without fail. |
|
|
Length options: 1050 – 6050mm
|
|
|
Height options: 30 – 45 – 60 – 85mm
|
In brief
ISOPLATE is a full-length rail PV mounting system for shingle-covered roofs, fixed to the roof purlins or beams. The PPLATE part developed for shingle roofs sits under the shingle covering, and special gasketed studs keep the installation watertight.
Frequently asked questions
Which roofs is ISOPLATE used on?
It is used on shingle-covered roofs. The rails are fixed to the concrete, steel or timber purlins and beams under the covering, so the direction of the purlins and beams determines the layout.
How does ISOPLATE keep a shingle roof watertight?
The PPLATE, developed specially for shingle roofs, is placed under the covering and fixed to the purlins with special gasketed studs. This gives a watertight seal and a secure installation.
How high does ISOPLATE lift the modules?
With the stud, BUP bracket and mounting rail together, the array can be lifted up to 16 cm above the roof covering. The better airflow can raise output by up to 5%.
Can the modules be installed portrait or landscape?
ISOPLATE is used in landscape layout. It suits modules 1,550-2,450 mm long, 950-1,200 mm wide and with a 35-45 mm frame height. The purlin spacing and direction must always be specified.
What are the weight, rail options and warranty of ISOPLATE?
It adds 1.4-2.4 kg per m² of roof area. Rail lengths are 1,050-6,050 mm and heights are 30, 45, 60 and 85 mm. The system carries a 12-year ISOTEC warranty.
