ISOBEAM X

©ISOBEAM X solar mounting system used as a full-length rail 3, 4 and 5 rib trapezoidal and sandwich coated It is applied on roofs to be mounted on purlins or beams.

Used in horizontal or vertical placement The ©ISOBEAM X mounting system is manufactured from high-strength 6063 T66 aluminum alloy, and consists of two rails. Rthe first of the rails runs in the rib direction ©BUP  and from the top of the roof covering with the stud is implemented. The second rail is used as a purlin across the rib direction, and the relevant span is calculated and specified by us for each region. The other rail, placed on top of the mounting rails installed in the perpendicular direction, is fixed with the ©XLAX fitting.

©BUP from the inside of the apparatus the option of 5 cm adjustment and that the machine socket can reach every area has been designed in such a way that With the stud + ©BUP + mounting rail, the solar power plant that you will apply can be lifted up to 20 cm from the roof covering. In this way, much better air circulation and production increases of up to %5 in power plant production performance can be created.

Four different heights In addition to being an economical solution with its option, it is long-lasting and covered by a 12-year ISOTEC warranty.

©ISOBEAM mounting system is designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.

Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp  & ©EasyClamp V.1.3 edge clamp sets are compatible with all of our systems and also offer up to 25% faster installation during the solar panel mounting process. 

It brings an additional load of 2.5 – 3.5 kg to 1 square meter roof area and is among our lightest mounting systems.