Pitched-roof PV · Türkiye

1006 kWp Pitched-Roof PV Plant in Ankara on ISOTRAP S

Module rows and profile ends
In brief

ISOTEC supplied the ISOTRAP S mounting system for a 1006 kWp pitched-roof solar plant in Ankara, Türkiye. Short aluminium profiles were laid in rows across the ribs of a large trapezoidal sheet roof, and the modules sit on top of them.

The project

Rows of modules on a large roof

The plant was built on a large, light-coloured trapezoidal sheet roof in Ankara. In the first photo the modules run in rows towards the roof edge, with the ends of the profiles visible along their lower edge. The second photo shows a section still without modules: the profile rows are laid out across the roof and cables run along the rows.

The roof uses the ISOTRAP S system. It places short aluminium profiles on the ribs of the roof, each profile bridging two neighbouring ribs, and the modules are clamped onto these profiles.

Section · schematic
Modulemid clampend clampISOTRAP S profile (20–85 mm)2 screws per crest + EPDM
Schematic drawing of the general ISOTRAP S system layout. No dimensions are given for this project.
Technical details
Capacity
1006 kWp
Roof type
Trapezoidal sheet, pitched
Profile
ISOTRAP S · short profile
Fixing
Profiles on ribs
Location
Ankara, Türkiye
Scope
Mounting system supply
FAQ

Which mounting system was used on this roof in Ankara?

ISOTEC's short-profile system for trapezoidal and sandwich roofs, ISOTRAP S.

How were the profiles placed on the roof?

Short aluminium profiles were laid in rows on the ribs of the trapezoidal sheet.

How large is the plant?

The installed capacity is 1006 kWp.

From the same country

More ISOTRAP S projects

Planning a project on a sandwich or trapezoidal sheet roof?

Send us the roof covering, the rib spacing and the module size, and we will prepare a project-specific ISOTRAP S quotation.

Erkan Öztürk

Erkan Öztürk

Founder & CEO @ ISOTEC
Solar Mounting Systems